User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP 5340A Sub1
DATE:                  21-Apr-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       15
NUMBER OF LINES:       85
CONFIGURATION:         HP 3325A
STANDARD:              Mieco 1402
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         {}
  1.004  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.005  HEAD         {º FREQUENCY ACCURACY TEST º}
  1.006  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.007  HEAD         {}ÍÍ FREQUENCY ACCURACY TEST ÍÍ
  1.008  DISP         Connect the 3325A output to the UUT 1Mê input through
  1.008  DISP         a 50 ê feedthrough.
  1.009  STD          Mieco 1402
  1.010  JMP          2.001
  1.011  EVAL
  2.001  IEEE         [@3325] FU 1; AM 1 VR; FR 10 MH
  2.002  MEMI         Use keyboard to enter actual UUT reading in MHz.
  2.003  ACC          10.000000MH    0.0000009U
  2.004  MEME
  2.005  MEMC         MH             0.000019U     1V
  3.001  IEEE         [@3325] AM .001 VR
  3.002  HEAD         {}
  3.003  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  3.004  HEAD         {º SELF-CHECK TEST º}
  3.005  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  3.006  HEAD         {}ÍÍ SELF-CHECK TEST ÍÍ
  3.007  DISP         Set the UUT front panel controls as follows:
  3.007  DISP         RANGE switch ................... CHK
  3.008  JMP          4.001
  3.009  EVAL
  4.001  MEMI         Use keyboard to enter UUT reading in MHz.
  4.002  MATH         MEM1=10
  4.003  MEME
  4.004  MEMC         MH             0.000001U
  5.001  EVAL   {Is the DIR annunciator lite?}
  6.001  EVAL   {Is the GATE light flashing?}
  7.001  HEAD         {}
  7.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍ»}
  7.003  HEAD         {º RESET TEST º}
  7.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍͼ}
  7.005  HEAD         {}ÍÍ RESET TEST ÍÍ
  7.006  DISP         Push the RESET switch.
  7.007  JMP          8.001
  7.008  EVAL
  8.001  EVAL   {Did the display initially show all zeros, then 10MHz?}
  9.001  HEAD         {}
  9.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  9.003  HEAD         {º RESOLUTION TEST º}
  9.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  9.005  HEAD         {}ÍÍ RESOLUTION TEST ÍÍ
  9.006  DISP         Slide RESOLUTION switch through all positions to 1MHz,
  9.006  DISP         noting that one fewer digit is displayed for each step
  9.006  DISP         of the switch.
  9.007  JMP          10.001
  9.008  EVAL
 10.001  EVAL   {Did UUT show proper digits for each switch setting?}
 11.001  MEMI         Use keyboard to enter UUT reading in GHz.
 11.002  MATH         MEM1=.01000
 11.003  MEME
 11.004  MEMC         GH             0.0015U
 12.001  HEAD         {}
 12.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 12.003  HEAD         {º SAMPLE RATE TEST º}
 12.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 12.005  HEAD         {}ÍÍ SAMPLE RATE TEST ÍÍ
 12.006  DISP         Set RESOLUTION switch to 10Hz. Rotate SAMPLE RATE
 12.006  DISP         control clockwise and check that the GATE lamp off time
 12.006  DISP         increases.
 12.007  DISP         Set SAMPLE RATE control to fully cw position.
 12.008  JMP          13.001
 12.009  EVAL
 13.001  EVAL   {Is the GATE lamp off time at least 5 seconds?}
 14.001  DISP         Set SAMPLE RATE control to HOLD.
 14.002  EVAL   {Did the GATE lamp stop flashing and is the display held?}
 15.001  END